Installing Windows 7 on a USB

Installing Windows via USB flash is in fact a lot of advantages compared to the CD or DVD disk, we do not have to worry about CD or DVD is scratched, sometimes difficult in the windows installation process, while the Flashdisk itself, it is should can't happen again.

I'll show 2 ways (manually and automatically) to install Windows 7 via USB FlashDisk Before we begin, need to be prepared are: At least 1pcs Flashdisk with 4Gb or more, because Windows 7 at least take place for 3Gb.

Manually:

1. Plug your USB Flashdisk.

2. Press WIN + R keys, type cmd and click OK.

3. Type diskpart and press ENTER.

4. Type list disk, press ENTER and choose which one is your USB flash, make no mistake to select cause it will format another disk. if you have only 1 hard drive and the flahdisk will in disk1.

5. Type select disk 1 and press ENTER.

6. Type the clean and press ENTER.

7. Type create a primary partition and then press ENTER.

8. Type select partition 1 and press ENTER

9. Active type and press ENTER.

10. Type fs = FAT32 format and press ENTER

11. Type assign and press ENTER

12. Type exit and press ENTER.

13. Insert the DVD disk 7 and a copy of windows is all this DVD contents to your USB Flaskdisk.

14. Booting your computer through a USB Flashdisk, with bios settings on your computer, make sure it via USB boot Flashdisk, if the steps is right, then the windows installation process should go through the USB Flashdisk.

Automatically:

Automatic way of course is my choice, and to that already available WinToFlash program name, the program will be put through manually as above, we need to do is run the program, select the source 7 and the windows USB flashdisk.

1. Download the latest version WinToFlash program.

2. Extract and run the file WinToFlash.exe

3. Click the "Check" and start the process of transfer of the Windows setup wizard.

4. Click "Next"

5. Select the location of the file Windows 7 and location of your USB Flaskdisk. click "Next".

6. Select "I Accepted the terms of the license agreement" and click "Continue"

7. Click OK to start formatting the USB Flashdisk and windows 7 file will automatically be inserted into the USB Flashdisk.

8. Click "Next" when finished copying, and boot your computer via USB Flashdisk earlier. If the steps are true, then the windows installation process should go through the USB Flashdisk.